Products
Product Categories
MR thyristor
MR thyristor
Overview
MR's Thyro-C series power thyristors are used as a ready-to-install solution for dynamic power factor correction. Compared with traditional contactor switching, Thyro-C has the following advantages:
Since the switching frequency is unlimited, the service life is long
Achieve smooth switching of capacitors
Very short switching time delay
Realize "real-time" compensation of power factor
Complete and compact structure
Strong anti-interference ability
Easy to install
No noise during operation
MR active filter cabinet
Rated voltage |
AC380V ±20% AC660V ±20% |
Rated frequency |
50HZ/60HZ |
Filter function |
5-51th harmonic (selective filtering, each harmonic compensation can be set separately) |
Start response time |
<0.1ms |
Power consumption |
≤2.5% |
On-off level |
60KHZ |
Controller |
3DSP control |
communication method |
Using Modbus remote communication protocol, communication interface RS485 / 232 and CAN bus |
Protection level |
IP21 or customized according to user requirements |
cooling method |
Smart air cooling |
noise |
<60dB@1M |
Installation method |
Floor-mounted cabinet or module embedded installation; |
Ambient temperature |
-10 ~ 50 ℃ |
Relative humidity |
Max 95% |
Scalability |
Different capacity or parallel connection with the same capacity can be realized between the systems, the number of parallel connection is less than 10 |
Contact us
Address: Building 3, Xingsha International Enterprise Center, Changsha Economic and Technological Development Zone
Phone:0731-85524209
Email:cshk@cshkdq.com
